GRINDERMINDER PRICING

ITEMS NEEDED FOR INSTALLATION

Safety glasses or goggles
½” diameter masonry drill bit, (or ½” diamond tipped drill bit for granite)
Rubber Mallet
Epoxy
Epoxy dispensing gun

Epoxy is necessary for installation of all non-threaded GrinderMinders and available for purchase through Grind to A Halt, or you may provide your own.

Please Note: The drill and drill bits are the responsibility of the installer.

GrinderMinders should never be placed in the path of pedestrians.

PRICING

EPX: Epoxy @ $ 39.50/cartridge (Sufficient for up to 150 pieces)

EPX GUN: Epoxy Dispensing Gun @ $ 22.95 each

EPX NOZ: Additional Nozzles @ $ 4.95 each (recommended)

PART NUMBERS

ORIGINAL GRINDERMINDERS

Proudly made in the USA with materials sourced in the USA! Our original design and very first product offering is the Ball GrinderMinder. It is a 1″ stainless steel ball with a 1.25″ stem. Once installed, the finished product should look like a stainless steel ball resting on the edge of the surface. With this ball design, we recommend drilling at an angle into the concrete edge, which makes this design all the more secure, lessening the leverage of vandals trying to remove them. The ball shape lends itself to both contemporary and traditional designs, complimenting your design. The black oxide finish softens with time to resemble an antiqued bronze look.

Solid Stainless Steel with a brushed finish (our most popular choice)
Solid Stainless Steel with a Black Oxide finish (soft, matte black appearance)

PRICING

Sold by piece = $19.95 each

For Stainless Steel with a Black Oxide finish, add $1.00 each.

For Brass with Clear Powder Coating = $26.95

PART NUMBERS

Ball GrinderMinder Part Numbers:

GB1013N for Stainless Steel finish
GB1013B for Black Oxide finish
GB1017P for Brass finish, clear coated

Original GrinderMinder Installation

Download PDF

GrinderMinder Detail Sheet

Download PDF

HEMISPHERE (HEMI) & CYLINDER GRINDERMINDERS

The sleek new Hemisphere (“Hemi”), design is based on the original GrinderMinder and features a sleek lower profile “half-dome” top. The Cylinder GrinderMinder features a contemporary drum shape – clean and simple. Just like the original GrinderMinder, they look great and secure well into edges of concrete or stone benches, walls and planters.

PRICING

Sold by piece – order the quantity you need $19.95 each For Stainless Steel with a Black Oxide finish, add $1.00 each.

PART NUMBERS

Hemi GrinderMinder (dome shape) Part Numbers:

GH1013N for Stainless Steel finish
GH1013B for Black Oxide finish

Cylinder GrinderMinder (drum shape) Part Numbers:

GC1013N for Stainless Steel finish
GC1013B for Black Oxide finish

Hemisphere & Cylinder GrinderMinder Installation

Download PDF

Hemisphere & Cylinder GrinderMinder Detail Sheet

Download PDF

Handrail Minders

Handrail Minders are made from 6061 Aluminum (prepared for paint). Kit includes: (1) Handrail Minder, (2) self-drilling and threading stainless steel screws. We also recommend using Locktite® on screws to deter vandals.

PRICING

Round Handrail Minders (1-5/8” O.D. Handrail) @ $29.90 each

Rectangle Handrail Minder (for flat-topped handrails) @ $29.90 each

Please call 1.630.365.2375 for pricing on custom sizes or materials.

PART NUMBERS

Flat & Round GrinderMinder Installation

Download PDF

Round Handrail Minder Detail Sheet

Download PDF

Flat Handrail Minder Detail Sheet

Download PDF

Threaded GrinderMinders

GrinderMinders that are perfect for use on benches or thin /unusually shaped handrails. The 1” ball has a threaded hole on the underside that will accept a bolt.

PRICING

Stainless Steel balls with threaded hole (Black Oxide finish) @22.40 each. Bolts ordered separately, according to length specified. Please call 1.630.365.2375 for pricing on custom sizes or materials.

PART NUMBERS

Threaded GrinderMinder Installation

Download PDF

Threaded GrinderMinder Detail Sheet

Download PDF

IMPORTANT NOTE: GrinderMinders should never be used in the path of pedestrians

LOOKING FOR A CUSTOM DESIGN?

Grind to a Halt can manufacture custom machined products to your specifications.

If you have a design in mind that is not offered here, please contact us to discuss the possibility of custom work. Call 630.365.2375 or email us.